Last of the hoppers ...

... well for now at any rate!

A belated Happy New Year to all as we start out on our modelling voyage for 2016.

Just before we launch into the last couple of 21T hopper packs for now I'd like to tell you about some changes to the way we communicate and showcase what we're doing that we're introducing for 2016.

Since taking Fastline Simulation full time the mixture of blog and website hasn't quite felt comfortable and a little forced at times. As a consequence we're no longer going to publish a monthly review on the website and will be moving away from individual item themed blog posts. Instead, the plan is to publish (at the moment) one blog post on Thursday with a review of all that has been done and that can be shown during the past week. Hopefully this will feel a little more coherent and will give a better pace to the posts.

That said, the post this week is all about 21T coal hoppers as we catch up the last two packs of these that are currently waiting to be released!

Diagram 1/143 unfitted 21T coal hoppers

We've been producing a number of wagon packs for Train Simulator featuring the British Railways builds of 21T coal hoppers based on the LNER design and this pack tells another small part of the story. Diagram 1/143 was issued in 1949 and covered a design of 21T coal hopper with a riveted body rather than the welded bodies constructed in previous lots. Some 2750 vehicles were constructed during the 1949 and 1950 building programs with all the wagons being unfitted and retaining a link to their LNER heritage through long handbrake levers.

Rebodied dia. 1/146 unfitted 21T Coal Hoppers

Right back at the start of our exploration of the 21T coal hoppers we released the rebodied vacuum braked examples built originally to diagram 1/146. Now to finish off we have the unfitted example to the same diagram. In the 1970's British Rail initiated a large scale rebodying of the 21T coal hopper fleet with a new design of body featuring only two ribs on the side rather than the five previously seen. Both fitted and unfitted hoppers were rebodied and naturally a large number of hoppers from the in excess of 17,000 built to diagram 1/146 received new bodies. Although all of the hoppers in this wagon pack are the unfitted version they are to be supplied in both unfitted grey and fitted brown liveries mirroring real life where a large number of unfitted hoppers received the fitted brown livery!

Unfitted dia 1/141 21t HTO Coal Hoppers

Continuing our exploration of the complex history of  21T coal hoppers built by British Railways we're bouncing back to one of the earliest parts of the story with the diagram 1/141 hoppers. These were a direct descendent of the diagram built by the LNER and retained the LNER brake rigging and most noticeably the long LNER handbrake lever. Surprisingly the hoppers could still be found in use during the early 1980s and some were included in the various rebodying schemes - not something covered in this pack!

In keeping with the dia. 1/146 unfitted hoppers we previewed earlier in the week these hoppers worked hard and were subject to corrosion from the acidic nature of the coal that they carried. As a consequence we have prepared various levels of distress to allow the hoppers to created a varied rake of wagons. The hoppers also feature a number of different lettering styles which are applied at random but can be overriden to one of your choice should you desire.

Also in common with the dia. 1/141 hoppers these were unbraked and were not fitted with lamp brackets to carry a tail lamp as they were never envisaged to be at the rear of the train. Therefore, to allow users to be able to form correctly marshalled trains we will be bundling a dia. 1/506 unfitted brake van that we previewed in our 'Bonus Brake Vans - Part 1'.

Unfitted dia 1/146 21t HTO Coal Hoppers

One of our current rolling stock expansion themes for Train Simulator are the British Railways 21t Coal Hoppers. One of the last variations built has already been released in the form of the Rebodied dia. 1/146 HTV 21t Coal Hoppers.

Today we're looking back to a much earlier part of the story with the unfitted version of the dia. 1/146 hoppers which made up the majority of the wagons built to this diagram complete with the original style of body with five strengthening ribs and plain axleboxes.

Like most coal wagons these hoppers worked hard and were subject to corrosion from the acidic nature of the coal that they carried. As a consequence we have prepared various levels of distress to allow the hoppers to created a varied rake of wagons. The hoppers also feature a number of different lettering styles which are applied at random but can be overriden to one of your choice should you desire.

Given that the wagons were unbraked they were not fitted with lamp brackets to carry a tail lamp as they were never envisaged to be at the rear of the train. Therefore, to allow users to be able to form correctly marshalled trains we will be bundling a dia. 1/506 unfitted brake van that we previewed in our 'Bonus Brake Vans - Part 1' blog post a while ago.