HSA Scrap Wagons

The conversion of surplus HEA hoppers into HSA scrap wagons from about 1987 must have been one of the simplest conversions of a wagon.

The main aim of the conversion was to produce a flat bottomed wagon and to take the hoppers out of use as loading and unloading at scrap processors would be via mechanical grabs and magnets. This flat bottom was achieved in two ways, either a steel plate was welded across the bottoms of the hoppers at approximately under-frame height or a similar level of ballast was dropped into the wagon. The latter wagons can be identified by and increased tare weight that was patch painted on to the data panel.

This Train Simulator expansion is based on our previously released HEA hoppers which have been back through the works for updated materials and textures along with the fitting of some more recent developments which include:

• Intelligent tail lamps
• Variable infill method with tare weight patch
• Five different logo styles randomly applied with overrides
• Variable load planes randomly applied
• Body switching dependent on vehicle number with reference to end ladders on earlier vehicles
• Randomised textures of Railfreight red/grey versions

Weathered VCA Vans

A short while ago we showed you the full range of clean VCA vans that we will be including in our forthcoming Train Simulator 2016 expansion.

Today we present the work weary examples with patchy and faded paintwork and lettering. It's not a great leap to imagine the number of trips they have made from South Wales carrying products produced by the Metal Box company.

CEA Covered Hoppers [EWS]

Last week we showed off some pictures of the completed Loadhaul liveried CEA hoppers. This week it's the turn of the EWS ones.

Even though there have been some questions raised about the success of the CEA conversions it would appear that EWS saw some use for the small fleet of covered hoppers. A large number of them gained one of two variations of EWS livery either unbranded EWS maroon with stencilled lettering or fully branded EWS with gold lettering. In both cases a smart new retractable sheet in EWS maroon was also fitted.

As with the vast majority of our packs the wagons will be supplied with clean and weathered versions along with loaded and empty physics. These wagons also feature automatic body switching to take in to account the different positions of ladder and aer fitted with our intelligent tail lamp system.

Clean VCA Vans

We first gave you a glimpse of the VCA vans as the header image for the September Update. Today we felt it was about time to let you have a look at the full set of clean vans. Naturally there will be some weathered examples along later.

In 1971 a new design of air braked long wheelbase van with two centrally mounted sliding doors appeared from Ashford works. These 125 wagons to lot 3764 were coded as COV CD and were painted Freight Brown with a large Double Arrow high on the left hand side. In the 2nd half of 1974, Shildon Works constructed a further 100 vans to lot 3832. It is these 2 lots of wagons that feature in this pack. After the change over to TOPS, these vans were coded as VCA, though the 2nd lot were incorrectly labelled as VBA when new (not featured in the pack). In time the first lot were repainted in Maroon livery with a boxed Double Arrow and Railfreight branding. Both lots later received Railfreight Flame Red & Grey livery.

Loadhaul CEA Covered Hoppers

A fair while ago we shoed some pictures of the CEAs under development. Today it's a pleasure to show off the final versions with updated materials and textures and a few other tweaks.

The CEA conversion was one of the latter attempts to find a use for the large numbers of hoppers that were standing around with very little to do. They were converted in 1996 by the shadow privatisation company Loadhaul with a retractable sheet that could be rolled back from ground level by attaching a windlass to a spigot fitted to the under-frame to allow them to carry products which needed protecting from the weather or may have had issues with dust blowing off in transit. Interestingly a thin corner support was added to the later build wagons at the time of conversion which led to a little bit of confusion at one point in the development of this expansion!

Some 44 wagons were converted and they appear to have had questionable success in traffic. Some commodities that the wagons have been noted carrying include Limestone, Calcified Seaweed, China Clay, Petroleum Coke and Chipped Tyres for use at Aberthawe Cement Works.